The RFID Reader is a weatherproof proximity reader for door entry and clocking in. Staff present a card or fob and the reader passes the credential to your access control panel, which decides whether the door opens. It mounts inside or out, and because it reports over Wiegand it works with Computime access control panels and most third party controllers.
Specifications
| Weather rating | IP66. Sealed against dust and protected against heavy rain and hose jets, so it can be fitted on an external door or in a wash-down area. |
|---|---|
| Output format | Wiegand 26 bit or 34 bit. This is the standard access control wiring format, so the reader will connect to Computime panels and to most existing systems. |
| Standby current | Under 50mA. Low enough that several readers can run from one power supply without upgrading it. |
| Response time | Under 0.3 seconds from presenting a card to the door releasing, so it keeps up at shift changeover. |
What you will need
A reader on its own does not control a door. You will also need an access control panel to make the decision, a lock or maglock, a power supply, and cards or fobs for your staff. All of these are on our products page, and if you are not sure what your site needs, our Leeds team will spec it with you.
Supplied and supported from Leeds, with over 35 years of UK access control and time and attendance experience behind it. Talk to us if you want it specified for your site.
