A weatherproof electronic bell for signalling shift starts, breaks and end of day across a site. It uses a miniature solenoid with an integrated control circuit, which gives it good sound coverage on a very low current draw. IP55 rated and fitted with a tamper resistant cover plate, so it can go outside on a yard wall or a factory exterior and be heard across the site.
Specifications
| Protection rating | IP55. Protected against dust and low pressure water jets from any direction, so it can be mounted outdoors permanently. |
|---|---|
| Sound level | 95dB at one metre, loud enough to carry over machinery and across a yard. |
| Supply voltage | 230V AC. |
| Current consumption | 25mA, low enough that several bells can run from one circuit across a large site. |
| Dimensions | 155mm diameter, 85mm deep. |
| Tones | Single tone. |
| Security | Tamper resistant cover plate, so it cannot be casually silenced. |
Where it is used
Most often in manufacturing and on depot and yard sites, where shift and break times need signalling to people who are not near a screen or a phone. It also suits schools and any site where an indoor bell would not carry outside.
Supplied and supported from Leeds, with over 35 years of UK time and attendance experience behind it. Talk to us if you need it specified for your site.
